24 Inch Dredging Hose for Self Floating Dredge Floating Dock Hose

Product Description

Dredging Floating hose,rubber hose, HDPE floats,dredging pipes 

Dredging Self-floating hoses are suitable for the harshest sea or mining conditions. Equipped with PE foam body, adjusted to the bouyance of the dredged material. It's available inner diameters up to 1200mm, various lengths and pressure ranges.

Suction dredging hose is designed for rugged applications are available in any size. They make tighter bends under severe working conditions without knuckling. We can offer suction hoses depending on ID of hose, required bending angle and acceptable built-in length.

Features and Advantages:

1.Outer cover with excellent abrasion resistance and UV Protection.
2.Wearing colored indicator layer..Single foam floatation casing, preventing water absorption. 
3.The hose emergence above water is not less than 20% of the total volume.
4.High quality, wear resistant rubber. 
5.Flange design according to customers' request
6.Bending angle: In working condition, the bending angle is from 0-45 degrees
7.Discharge hoses are used with dredgers for silt/gravels conveyance.
8.Pipe wall thickness range: from 15mm up to 100mm.
9.The suitable working temperature: from -20ºC to +50ºC.
10.It is convenient to install, flexible to use and safe.

Drawings & Dimensions

Suction Dredging Hose Structure

Tube: Abrasive resistant synthetic rubber with high strength breaker plies and coated with a high grade synthetic rubber interior surface.
Reinforcement: High tensile strength fabrics with a steel inner structure. Fully embedded steel wire coils are incorporated to achieve kink, crush and local load resistance.
Cover: Synthetic rubber, resistant to abrasion, weathering, sea water and oil exposure. The cover, which incorporates reinforcing breaker plies is black with a bright orange spiral stripe or coated in tough bright orange polyurethane.

Dredge discharge hose can be used for many different applications. Such as a connecting hose between a cutter dredger and a discharge line. A jet water hose or as a floating steel pipe line. With a burst pressure up to 90 bar, it can be supplied in every size. Besides, it can be equipped with any kind of flange.

Item Code	Size		W.P.	B.P.	VACUUM	Wear layer	Cover Thickn	Length
	inch	mm	bar	bar	bar	mm	mm	m
SDH300	12	300	3-10	9-30	0.8	10-15	5	1-3
SDH400	16	400	3-10	9-30	0.8	10-15	5	1-3
SDH450	18	450	3-10	9-30	0.8	10-15	5	1-3
SDH500	20	500	3-10	9-30	0.8	10-15	5	1-3
SDH550	22	550	3-10	9-30	0.8	10-15	5	1-3
SDH600	24	600	3-10	9-30	0.8	10-15	5	1.5-3
SDH650	26	650	3-10	9-30	0.8	15-20	5	1.5-3
SDH700	28	700	3-10	9-30	0.8	15-20	5	1.5-3
SDH750	30	750	3-10	9-30	0.8	15-20	5	1.5-3
SDH800	32	800	3-10	9-30	0.8	15-20	5	1.5-3
SDH850	34	850	3-10	9-30	0.8	20-25	5-8	1.5-3
SDH900	36	900	3-10	9-30	0.8	20-25	5-8	2-3
SDH1000	40	1000	3-10	9-30	0.8	20-25	5-8	2-3
SDH1100	44	1100	3-10	9-30	0.8	25-30	5-8	2-3
SDH1200	48	1200	3-10	9-30	0.8	25-30	5-8	2-3
SDH1300	52	1300	3-10	9-30	0.8	25-30	5-8	2-3

Drede Discharge Hose Application:

Our dredge discharge hose is used for port and dock discharging of seawater, silt, sand and other dredging materials. The discharge hose has excellent stiffness and resistance to external physical damage.

Temperature: -25℃ to +80℃(-13℉ to +176℉)
Tube: Synthetic abrasive resistant rubber with high strength breaker plies to achieve maximum adhesion to the hose carcass.

Floating dredging hose consists of several layers. The inner discharge hose is protected by a floating body, which is laterally protected by a reinforced rubber shell. Several designs are available.

Item Code	Size		W.P.	B.P.	Wear layer	Cover Thickn	Length
	inch	mm	bar	bar	mm	mm	m
SDH300	12	300	5-15	9-30	10-15	5	1.5-2.0
SDH400	16	400	5-15	9-30	10-15	5	1.5-2.0
SDH450	18	450	5-15	9-30	10-15	5	1.5-2.0
SDH500	20	500	10-20	9-30	10-15	5	1.5-2.0
SDH550	22	550	10-20	9-30	10-15	5	1.5-2.0
SDH600	24	600	15-25	9-30	10-15	5	1.5-2.0
SDH650	26	650	15-25	9-30	15-20	5	1.5-2.0
SDH700	28	700	15-25	9-30	15-20	5	1.5-2.0
SDH750	30	750	15-25	9-30	15-20	5	1.5-2.0
SDH800	32	800	15-25	9-30	25-20	5-8	1.5-2.0
SDH900	36	900	20-30	9-30	20-25	5-8	2.0-3.0
SDH1000	40	1000	25-30	9-30	20-25	5-8	2.0-3.0
SDH1100	44	1100	25-30	9-30	25-30	5-8	2.0-3.0

Application:

Our dredging hose are intended for port and dock discharing of sea water, slit, sand and other dredging application. They are commonly used in part of the construction process of docks and ports.

Inner layer: high quality, excellent abrasion resistant rubber
Temperature: -25℃ to +80℃(-13℉ to +176℉)
Safety factor: 4:1
Characteristics:
1. The outer cover is made from a rubber compound that is higly resistant against weathering, UV and Ozone.
2. Wear indicator layers can be implemented in the dredge hoses which transport abrasive media.
3. A single foam floating layer prevents water absorption. The hose emergence above the water is not less than 20% of the total volume.
4. Custom flanges are available.
5. Bending angle: in working conditions, the bending angle is from 0°to +45°.

Detail Photos

Packing & Delivery

Company Profile

FAQ